The Web page won't display properly.
,Some Web pages may not display properly.
Headphones with remote control
There is no sound, or the sound quality from the headphones is poor.
,Check that the headphones are fully inserted into the system (
page 28).
,Check that the headset connector and the headphone plug are clean. If not, wipe them with a dry, soft cloth. See also "There is no sound."
The remote control does not work.
,Check that the headphones are fully inserted in the system (
page 28).
,Check that the remote control is not in hold mode. If it is, clear hold mode (
page 24).
Other issues
The system or AC adaptor is warm.
,During use, the system or AC adaptor may become warm. This is not a malfunction.
The system is turned on, but does not operate.
,Check that the system is not in hold mode. If it is, slide the power/hold switch up to clear hold mode (
page 35).
,Try sliding the power/hold switch up and holding until the power indicator turns off. The system will be completely turned off. Then turn on the system again.
US
information Additional
Troubleshooting 137