DAB Reception
English
Tuning to DAB for the first time
1Press SOURCE on the top of the system to select DAB (or press DAB on the remote control).
➜The system will start full scan to search for all available Band III channels automatically.
➜If no DAB service is available, “station not available" will appear on the display panel.
➜If there are available DAB services, the system will store all detected stations.
Re-tuning
By
During scanning, the system will initially display the following the following, where "CH" is the DAB channel and "N" is the number of the current multiplex (ensemble).
CH N
●Press SCAN briefly.
➜The display panel shows "FULL SCAN" and the system will start full scan to search for all available Band III channels again automatically.
●Press and hold SCAN for more than 2 seconds.
➜The display panel shows "QUICK SCAN" and the system will start a quick scan process to search for Band III channels again automatically.
●If you press 9 during scanning, the scanning process will stop and the system will return to the DAB frequency before scanning starts.
➜The other DAB operation buttons will be locked.
Note:
–If no DAB service is detected during the above processes, the display panel will show "NO SIGNAL".
Manual tuning
1Press and holdÉÅ (or ENTER/ÉÅ on the remote control) for more than 2 seconds to start manual tuning.
➜ The current DAB channel and frequency will be displayed.
2Press ¡ / ™ on the remote control to select your desired DAB channels backward/forward.
●PressÉÅ (or ENTER/ÉÅ on the remote control) to confirm and tune to your selected channel.
18
