Tuner
English
Tuning to radio stations
1Press SOURCE once or more to select FM (or FM on the remote control) .
2Press and hold 4 / ¢ (or 5 /6 on the remote control) until SEARCH appears
➜ The radio automatically tunes to a station with sufficient reception. Display shows SEARCH during automatic tuning.
3Repeat step 2 if necessary until you find the desired station.
●To tune to a weak station, press 4 / ¢ (or 5 /6 on the remote control) briefly and repeatedly until you have found optimal reception.
Programming radio stations
You can store up to a total of 20 FM radio stations in the memory,.
Automatic programming
Automatic programming will start from preset 1 or a chosen preset number. From this preset number upwards, former programmed tuner stations will be erased.The set will only program stations which are not in the memory already.
1Press the ALBUM/PRESET 43 (or ¡ / ™ on the remote control) buttons once or more to select the preset number where programming should start.
Note:
– If no tuner preset number is selected, default is preset 1 and all your presets will be erased.
2Press and hold PROG on the remote control) until AUTO PROGRAM appears.
➜Available stations are programmed: RDS stations followed by FM stations (See RDS).
➜After all stations are stored, preset station 1 will then be played.
Manual programming
1Tune to your desired station (see Tuning to radio stations).
2Press PROG on the remote control) to activate programming.
3Press ALBUM/PRESET 43 (or ¡ / ™ on the remote control) to allocate a number from 1 to 20 to this station.
4Press PROG on the remote control) to confirm.
➜Display shows the preset number, waveband and the frequency of the preset station.
5Repeat steps
●You can erase a preset station by storing another frequency in its place.
To listen to a preset station
●Press the ALBUM/PRESET 43 (or ¡ / ™ on the remote control) buttons once or more until the desired preset station is displayed.
●You can also use the Numerical Keypad (0~9) to input a number directly and tune to the station associated with this number.
●To input a number larger than 10, press SHIFT once or more to select the first digit you want and then use the Numerical Keypad (0~9) to input the second digit.
20
