Clock/Timer, Setting clock | Philips PDCC-JW-0817 guide

Clock/Timer

There are two possible methods for setting the clock: manually or automatically by using RDS.

Automatic clock setting

Refer to “Setting the RDS clock”.

1In standby mode, press and hold CLOCK on the remote control.

➜ The clock digits for the hours flash.

2Adjust VOLUME -/+(or press VOL +/- on the remote control) to set the hours.

3Press CLOCK again.

➜ The clock digits for the minutes flash.

4Adjust VOLUME -/+(or press VOL +/- on the remote control) to set the minutes.

5Press CLOCK to confirm the time.

The set can be used as an alarm clock, whereby the selected source (DAB, FM, DISC or USB) starts playback at a preset time. Make sure the

1Press and hold TIMER on the remote control. ➜ TIMER ON and the hours digits start flashing.

2Adjust VOLUME -/+(or press VOL +/- on the remote control) to set the hours.

3Press TIMER to confirm.

➜ The minutes digits start flashing.

4Adjust VOLUME -/+(or press VOL +/- on the remote control) to set the minutes.

5Press TIMER to confirm .

➜ TIMER OFF and the hours digits start flashing.

6Adjust VOLUME -/+(or press VOL +/- on the remote control) to set the hours.

7Press TIMER to confirm.

➜ The minutes digits start flashing.

8Adjust VOLUME -/+(or press VOL +/- on the remote control) to set the minutes.

9Press TIMER again.

➜ The source mode now is available for selection.

0Press SOURCE repeatedly (or press DAB, FM, USB, DISC on the remote control) to select the wake-up source (DAB, FM, DISC or USB).

Note:

– if you choose FM as the wake-up source, adjust VOLUME -/+ (or press VOL +/- on the remote control) repeatedly to select a preset station.

!Adjust VOLUME -/+(or press VOL +/- on the remote control) repeatedly to set the wake-up volume.

"Press TIMER to confirm.

➜ The timer is now set and activated.

Note:

–The set will exit from the timer setting mode if no button is pressed within 10 seconds.