DIGITAL TUNER
GENERAL INFORMATION
General maintenance
•Do not expose the set, batteries, CDs or cassettes to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight.
•To clean the set, use a soft, slightly dampened chamois leather. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing.
Safety information
•Place the set on a hard and flat surface so that the system does not tilt. Make sure there is adequate ventilation to prevent the system from overheating.
•The mechanical parts of the set contain
English
TUNING TO RADIO STATIONS
1.Select TUNER source.
™
is displayed briefly and then the radio station frequency is shown.
2.Press BAND once or more to select your waveband.
3.Press SEARCH ∞ or § (for AZ 2025 model only: on the
remote control, TUNING ∞ or §) and release when the frequency in the display starts running.
™The tuner automatically tunes to a station of sufficient
reception. Display shows 
during automatic tuning.
™If a FM station is received in stereo, STEREO is shown.
4.Repeat step 3 if necessary until you find the desired station.
• To tune to a weak station, press SEARCH ∞ or § briefly and repeatedly until you have found optimal reception.
To improve radio reception
–For FM, pull out the telescopic aerial. Incline and turn the aerial. Reduce its length if the signal is too strong (very close to a transmitter).
–For MW (LW), the set is provided with a
BATT |
OW |
7
