CD PLAYER
English
Programming track numbers
In the STOP position, select and store your CD tracks in the desired sequence. If you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1.Use the SEARCH ∞ or § on the set, (for AZ 2025 model only: on the remote control ¡ or ™) to select your desired track number.
2.Press PROGRAM.
™Display: PROGRAM and the selected track number Prog appears briefly.
™If you attempt to programme without first selecting a track
number, no SEL or no Prog scrolls across the display.
3.Repeat steps
™FULL is displayed if you attempt to programme more than 20 tracks.
4.To start playback of your CD programme, press PLAY•PAUSE 2; (for AZ 2025 model only: on the remote control 2;).
BATT |
LOW |
Reviewing the programme
In the STOP position or during playback, press and hold down PROGRAM for a while until the display shows all your stored track numbers in sequence.
Erasing a programme
You can erase the programme by:
–pressing STOP 9 once in the STOP position or twice during playback.
•no Prog scrolls across the display briefly and PROGRAM disappears.
–you select another source: TAPE / TUNER.
BATT |
LOW |
10
