Creating a new network connection

You can adjust network settings to connect to an access point and save the network connection data on the system. Network settings may vary depending on the equipment in use and the network environment. The following instructions are based on the most common network confguration and may not apply to all installations.

1Select (Network Settings) under

(Settings) from the Home Menu, and then press the button.

2Select “Infrastructure Mode”, and then press the button.

3Select “New Connection”, and then press the button.

 

Network

 

 

Adjusting network settings

 

4

Select “Scan”, and then press the

GB

 

right button.

Hint

When using an access point that supports automatic setup, select “Automatic” and then follow the on-screen instructions to automatically complete the necessary settings. For information on access points that support automatic setup, contact the access point manufacturer.

19