7
Getting Started

Getting Started

Setting Up Your TV
Some TV models are packaged with a detached Table-Top Stand s o you can mount
your TV to a wall right away. If you are not mounting the TV to a wa ll, you will need to
attach the Table-Top Stand. You will need a Phillips screwdriver (not supplied) and the
supplied screws to complete the task. Look for the supplied Table-Top Stand instruction
leaflet.
Be sure to consider the following while setting up your TV:
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of people; larger size TVs require two or more people.
• Correct hand placement while carrying the TV is very important for safety and to avoid damage.
• Do not p ut stress on the LCD panel or the frame around t he screen.
• Ensure your TV has adequate ventilation, see page 15.
• For best picture quality, do not expose the screen to direct illumination or sunlight.
• Avoid installing the TV in a room with reflective wall and floor materials.
• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may
cause moisture condensation. This may cause the TV to show poor picture and/or poor color.
Should this occur, allow moisture to evaporate completely before powering the TV on.
KDL-70R550A/70R520A/60R550A/
60R520A
KDL-50R550ABe sure to hold the bottom of
the panel, not the front part.