8
Attaching the Table-Top Stand
Refer to the supplied Table-Top Stand instruction leaflet f or proper attachment.
• Be careful to not pinch your hands or the AC power cord when you install the TV set to the Table-
Top Stand.
1Place the TV set on the Table-Top Stand.
2Fix the TV to the Table-Top Stand using the supplied screws. The a rrow marks
indicate the location of the screw holes used for securing the T able-Top Stand.
• Hold the TV with one hand to avoid it dropping when attaching.
• Align the TV from the top, slide it in until the guide pins cannot be seen.
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• When detaching the Table-Top Stand, reverse the attaching procedure. Do not remove any
screws other than those used when attaching the Table-Top Stand.
KDL-70R550A/70R520A/60R550A/
60R520A
KDL-50R550A