Notes

You cannot pause recording in Synchro-Recording.

If Repeat Play is selected, it is automatically canceled.

If Shuffle Play is selected, it is automatically canceled.

The following functions do not work while Synchro-Recording:

Silent Pause function

Level Sync function

Manual Track Making function

Fade-in, Fade-out recording

Recording level adjustment (the recording level is set to the same as original disc)

During Synchro-Recording, the Direct Recording function is turned on regardless of the Setup Menu setting.

When copying a disc digitally recorded under control of the Serial Copy Management System (SCMS), the unit automatically select the analog recording. High speed recording changes to normal speed recording. For details on SCMS, see page 20.

When copying a commercial music CD contains copy protection code, the unit automatically select the analog recording. High speed recording changes to normal speed recording.

SBM function is available only for analog recordings (page 34).

You cannot stop recording when finalizing in Make-Disc Synchro-Recording.

High-Speed Synchro-Recording

You can easily make digital recordings from a CD to a CD-R or CD-RW, faster than normal speed Synchro-Recording. You cannot monitor the recorded signal while recording. To use Make-Disc Synchro-Recording, set “Make Disc” in the Setup Menu to “On” beforehand

(page 35).

 

Recording/Editing

 

 

When using the remote, set DECK A/DECK B

 

to DECK B.

 

 

DISC 1-5 A(OPEN/CLOSE for RCD-W100)

 

POWER

OPEN/CLOSE

 

CD SYNCHRO HIGH x H

DECK A/DECK B

CD SYNCHRO

HIGH

H

x

1 Press POWER.

2 Press OPEN/CLOSE of DECK B and place a recordable CD-R or CD-RW on the disc tray. Press OPEN/CLOSE of DECK B again to close the disc tray.

With the label side up

“TOC Reading” appears. The unit starts to read the TOC (Table of Contents) data and shows the type of the disc on the deck in the display.

continued

23