Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Notes
•Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.
•Be sure to place the player on a flat, horizontal place. If the player is left on a slanted position, it may cause a malfunction or damage the player.
This Unit Can Use the
Following Discs
The unit can use three types of discs as follows:
Audio CDs
Discs with these logos can be played by both DECK A (the CD player section) and DECK B (the
Started Getting
•If the following occurs during CD playback or recording, a reading error may occur or noise may be produced in the recorded results:
–The disc tray or other part of the system is bumped.
–The system is placed on an uneven or soft surface.
–The system is located near a speaker, door, or other source of vibration.
Audio
Discs with this logo are recordable only one time. When you finalize the
disc (page 29), you can play it in either DECK A (the CD player section) or DECK B (the
recording section), or any conventional CD player (you may not be able to play it in some CD players), including home, car, and portable models. (An unfinalized disc can be played only in DECK B.) When you buy a
Audio
Discs with this logo are recordable, and also
finalize the disc (page 29), you can play
it in either DECK A (the CD player section) or DECK B (the
RW recording section), and
This logo means that an unit is compatible with Audio
Note
On this player, you can play MP3 files on DECK A only. For details, see “Playing a disc with MP3 files” on page 11.
7