Self-diagnosis Function

When the self-diagnosis function is activated to prevent the player from malfunctioning, three character service numbers in a combination with a message appears in the display. In this case, check the following table.

Message

Explanation

C12/

You are trying to record a disc that

Cannot Copy

cannot be played back in DECK-A

 

or with an external device, such as

 

CD-ROM or VIDEO CD.

 

• Remove the disc, and then insert a

 

music CD for playback.

 

 

C13/

Recording has not been completed

Rec Error

successfully because of vibration.

 

• Relocate the unit in a place free of

 

vibration and restart the recording

 

again.

 

 

 

The disc you try to record is

 

excessively dirty (such as oil-

 

stained or finger marked) or

 

scratched. Or the disc is not

 

normal.

 

• Replace the disc with another one

 

and restart the recording again.

 

 

C14/

The unit did not read the TOC

TOC Error

information.

 

• Insert other discs.

 

 

C41/

The sound source you are trying to

Cannot Copy

record is a copy of a commercial

 

music software. Or you are trying

 

to record on a CD-R/CD-RW

 

digitally.

 

• Because of the restriction of the

 

Serial Copy Management System,

 

you cannot record a copy of a

 

commercial music software.

 

Neither can you record a CD-R/

 

CD-RW digitally.

 

 

C71/

If this message is displayed

Din Unlock

momentarily, this is not an error. It

 

is caused by the digital signal

 

during recording.

 

 

 

During recording of a digital sound

 

source, the connecting cable has

 

been disconnected or the player of

 

the sound source has turned off.

 

• Connect the cable or turn on the

 

digital player.

 

 

System Limitations

“TOC Reading” appears in the display for a long time

Regardless of the disc, “TOC Reading” appears in the display of DECK B longer than in that of DECK A. This is because, DECK B is a CD-R/RW writer and reads various version information while setting optimum recording condition.

Limitations when recording over an existing track

•The correct remaining recording time may not be displayed.

•The remaining recording time may be inaccurately displayed relative to the total recorded time.

•You can record up to 99 tracks.

Note

When you turn on the unit, you will hear some mechanical noise from the unit. This is not a malfunction.

30