Basic Operations

Playing a CD

This unit has two decks.

In this manual, the CD player section is just called DECK A, and the CD-R and CD-RW recording section is called DECK B.

When using the remote, set SELECT to CD for operations on DECK A (the CD player section), or to CDR for operations on DECK B (the CD-R or CD-RW recording section).

 

 

 

 

 

DISC 1-5 A

OPEN/CLOSE

POWER (OPEN/CLOSE for RCD-W10)

 

 

H

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H X AMS

AMS x X

xPLAY MODE

1Turn on the amplifier and adjust the volume to the minimum.

2Set the function of the connected amplifier with its input selector.

3Press POWER.

4Press OPEN/CLOSE (or one of the DISC 1-5 A buttons for DECK A of RCD- W50C) and place a disc on the inner circle of DECK A (or B). Press OPEN/ CLOSE (or A) again to close the disc tray.

With the label side up

5 For DECK A of RCD-W50C, press PLAY MODE repeatedly to select the Continuous play mode.

 

 

When you

The unit plays

 

 

select

 

 

 

 

 

 

 

ALL DISCS

All discs in the unit consecutively

 

 

 

in the order of the disc number.

 

 

 

 

 

 

1 DISC

Only one disc you have selected.

 

 

 

 

 

6 Press H.

 

8

 

The unit starts playing. Adjust the volume on

 

the amplifier.

 

To

Do the following:

Stop playback

Press x.

 

 

Pause playing

Press X. Press the button again or

 

press Hto resume playing.

 

 

Select the disc

Press one of the DISC 1-5

(for DECK A of

buttons.*

RCD-W50C)

 

 

 

Go to the next disc

Press D. SKIP on the remote.

(for DECK A of

 

RCD-W50C) Z

 

 

 

Go to the next

Turn AMS**clockwise (or press

track

>on the remote ).

 

 

Go to the beginning

Turn AMS counterclockwise (or

of the current track

press .on the remote).

or the preceding

 

track

 

 

 

Remove the disc

Press OPEN/CLOSE (or A),

 

whichever contains the disc you

 

want to remove after stopping

 

play.

 

 

*When the disc is in the unit, the indicator lights up

in orange, then it turns green when the disc is selected. **AMS: Automatic Music Sensor

Tips

•You can start playing with the track selected in Step 6.

1Turn AMS (or press ./>or the number buttons on the remote) to select the track you want to play using the display*.

2Press H.

*See “Using the Display” on page 9.

•You can remove or load discs while playing the other deck. Press OPEN/CLOSE (or A) of the deck that is not currently playing to open that tray, and remove or load a disc.

•The DISC 1-5 button indicator lights up when the disc is in the tray. The indicator turns to green when the disc is selected.

•You can connect a headphone to the PHONE jack on the front panel. Turn the PHONE LEVEL control to adjust the volume.

•You can replace any discs in the other disc trays while playing a disc in DECK A of RCD-W50C. Press OPEN/CLOSE (or A) of the deck that is not currently playing to open that tray, and remove or load a disc.

Notes

•You can play unfinalized CD-Rs or CD-RWs only in DECK B. For the detailed explanation about finalizing, see “Finalizing a CD-R or CD-RW” on page 24.

•Do not leave the disc tray open when the unit is not in use to prevent dust and dirt from entering and prevent damage to the disc tray.

•When you turn on the unit, you will hear some mechanical noise from the unit. This is not a malfunction.