15GB

Basic Operations

• Sony cannot accept responsibility in the event
that data recorded to iPod/iPhone is lost or
damaged when using an iPod/iPhone with this
system.

Playing a USB device

The audio formats that can be played back
by this system are as follows:
– MP3: file extension “.mp3”
– WMA: file extension “.wma”
– AAC: file extension “.m4a”, “.mp4” or
“.3gp”
– WAV: file extension “.wav”
If the audio files have the above file
extension but are not the respective
formats, the system may produce noise or
may malfunction.
Check the websites for the information
about compatible USB devices (page 25).
1Press FUNCTION +/– to select
USB function.
2Connect a USB device to the
port.
3Press N.

To change the play mode

Press PLAY MODE repeatedly.
• Normal Play (blank): playback in
sequence of all audio files on the USB
device
• Folder Play (“FLDR”)1): playback all
audio files in the specified folder on the
USB device
• Shuffle Play (“SHUF”)2)3): playback in
random order of all audio file on the
USB device
1) You cannot select Folder Play and “ ” at
the same time.
2) You cannot select Shuffle Play and Repeat
Play at the same time.
3) When you turn off the system, the selected
Shuffle Play is cleared and the play mode
returns to Normal Play.

To select Repeat Play

Press REPEAT repeatedly.
• : repeat all audio files on a USB
device or in the folder
• : repeat an audio file
Notes on the USB device
• The playback order for the system may differ
from the playback order of the connected
digital music player.
• Be sure to turn off the system before removing
the USB device. Removing the USB device
while the system is turned on may corrupt the
data on the USB device.
• Compatibility with all encoding/writing
software cannot be guaranteed. If audio files
on the USB device were originally encoded
with incompatible software, those files may
produce noise or interrupted sound, or may
not be played back at all.
• This system can recognize up to
– 256 audio files in a folder.
– 65,536 audio files in a USB device.
– 256 folders in a USB device.

To use the system as a battery

charger

You can use the system as a battery
charger for USB devices that have a
rechargeable function when the system is
on.
Press FUNCTION +/– repeatedly to
select the USB function.
The charging begins when the USB
device is connected to the port. The
charge status appears on the display panel
of the USB device. For details, refer to the
operating instructions of your USB
device.