20GB
3Press / repeatedly to select
“ON” or “OFF”.
4Press "/1 to turn off the system.
When Bluetooth standby mode is set to
on, the system will turn on
automatically when you establish the
Bluetooth connection from the
Bluetooth device.
Note
The system will not enter Bluetooth standby
mode if you erase the pairing information.
Listening to the radio
1Press FUNCTION +/– repeatedly
to select FM or AM band.
2For automatic scanning:
Press TUNING MODE repeatedly
until “AUTO” lights up in the display
panel. Then, press +/–.
Scanning stops automatically when a
station is tuned in. Then “TUNED”
and “ST” (for FM stereo programs
only) light up in the display panel.
If “TUNED” does not light up and
scanning does not stop, press x to stop
scanning. Then, perform manual
tuning (below).
When you tune to an FM station that
provides RDS services, information
such as the service name or station
name is provided by broadcasts.
You can check the RDS information
by pressing DISPLAY repeatedly.
For manual tuning:
Press TUNING MODE repeatedly
until “AUTO” and “PRESET”
disappear from the display panel.
Then, press +/– repeatedly to tune to
the station you want.
Tip
To reduce static noise on a weak FM stereo
station, press FM MODE repeatedly until
“MONO” lights up in the display panel.