Program listings for some channels are missing.

,It may take several days for the recorder to receive all of the TV Guide On Screen data.

,Some channels, such as satellite channels, are not displayed by the TV Guide On Screen system.

,All of the TV Guide On Screen data could not be received because the reception is poor.

The sound volume is low.

,The sound volume is low on some DVDs. The sound volume may improve if you set “Audio DRC” in “Audio” setup to “TV Mode” (page 94).

,Set “Audio ATT” in “Audio” setup to “Off” (page 93).

,One of the TVS effects is selected (page 61).

The program listing is not up to date.

,The recorder was in use during the time that the TV Guide On Screen data was scheduled to be downloaded.

,All of the TV Guide On Screen data could not be received because the reception is poor.

SoundThere is no sound.

,Re-connect all connections securely.

,The connecting cord is damaged.

,The input source setting on the amplifier or the connection to the amplifier is incorrect.

,The recorder is in reverse play, fast-forward, slow motion, or pause mode.

,If the audio signal does not come through the DIGITAL OUT (OPTICAL or COAXIAL)/ HDMI OUT jacks, check the “Audio Connection” settings in “Audio” setup (page 94).

No sound is output from the HDMI OUT jack.

,Try the following: 1Turn the recorder off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then connect the HDMI cord again.

,The HDMI OUT jack is connected to a DVI device (DVI jacks do not accept audio signals).

,The equipment connected to the HDMI OUT jack does not conform to the audio signal format, in this case set “Audio(HDMI)” of “Audio Connection” in “Audio” setup to “PCM” (page 95).

Sound distortion occurs.

,Set “Audio ATT” in “Audio” setup to “On” (page 93).

An alternate audio track cannot be recorded or played.

,Second Audio Program (SAP) is not available for all programs. The program you are recording does not have a second audio program.

,You have set “Tuner Audio” in “Options” settings to “Main” (page 98). Select “SAP” to record alternate audio programs.

,If you have connected an AV amplifier to the DIGITAL OUT (OPTICAL or COAXIAL) jack and want to change the audio track for a DVD- RW (VR mode) during playback, set “Dolby Digital” of “Audio Connection” in “Audio” setup to “D-PCM” (page 94).

PlaybackThe recorder does not play any type of disc (except HDD).

,The disc is upside down. Insert the disc with the labeled side facing up.

,The disc is not correctly inserted.

,Moisture has condensed inside the recorder. Remove the disc and leave the recorder turned on for about half an hour until the moisture evaporates.

,If the disc was recorded on another recorder, the recorder cannot play the disc if it was not finalized (page 40).

The recorder does not start playback from the beginning.

,Resume play was activated (page 62).

,You have inserted a DVD whose Title menu or DVD menu automatically appears on the TV screen when it is first inserted. Use the menu to start playback.

Sound is noisy.

,When playing a CD with DTS sound tracks, noise will come from the LINE OUT 1/2 R- AUDIO-L jacks (page 63).

The recorder starts playing automatically.

,The DVD VIDEO features an auto playback function.

102