Sony RDR-HX715 Audio Settings (Audio), and, Settings, Line Input, Line1 Input, Line3 Input, Audio ATT (attenuation), Select “SETUP,” and press ENTER

Line Input

Sets the method of inputting video signals from the LINE IN jacks on the rear panel of the recorder. Select an option for each of the items below according to the combination of jacks and methods that you are going to use.

Line1 Input

Selects a method of inputting video signals for the LINE IN 1 jack on the rear panel of the recorder.

Video	Inputs video signals.
S Video	Inputs S video signals.
Component	Inputs component signals.

Line3 Input

Selects the method of inputting video signals for the LINE IN 3 jack on the rear panel of the recorder. The pictures will not be clear if this setting does not match the type of video input signal.

Video	Inputs video signals.
S Video	Inputs S video signals.

Audio Settings (Audio)

The “Audio” setup allows you to adjust the sound according to the playback and connection conditions.

1Press SYSTEM MENU while the recorder is in stop mode.

2Select “SETUP,” and press ENTER.

3Select “Audio,” and press ENTER.

The “Audio” setup appears with the following options. The default settings are underlined.

SETUP

Settings	Audio ATT :	Off
Video	Audio DRC :	Standard
Audio	Downmix :	Dolby Surround
Features	Audio Connection

Options

Easy Setup

Audio ATT (attenuation)		Settings
If the playback sound is distorted, set this item to
“On.” The recorder reduces the audio output level.		and
This function affects the output of the following
jacks:		Adjustments
– LINE OUT (R-AUDIO-L) 1/2 jacks
On	Select this when the playback
	sound from the speakers is
	distorted.
Off	Normally select this position.

,continued 93