4Press the number buttons or </M/m/, to enter the TV guide page number, and press ENTER to confirm the setting.

•If you make a mistake, press CLEAR to re- enter the correct number.

To set or change another TV guide page number, repeat steps 3 and 4 above.

zHint

To view Teletext information on your TV screen during a broadcast, switch to your TV’s tuner by pressing

tTV/VIDEO.

bNotes

•In step 4 above, enter “000” if you do not want to use the TV guide page number for automatic labelling. The recorder will instead store a default title name (programme position, start time - stop time).

•Refer to the Teletext information on your TV screen to obtain the TV guide page number with programme titles and their start times.

•If the Teletext TV guide has a page which always shows the programmes for the current day, this page should be input for all days.

•If you start recording more than three minutes before the programme is scheduled to start, the correct label information may not be transferred.

•Note that this function may not work correctly with programmes broadcast from some stations.

•If the broadcast system updates the Teletext information at the moment recording starts, the title label may not correspond to the recorded programme. In this case, you may have to manually enter the correct title (page 36).

ClockAuto Adjust

Turns on the Auto Clock Set function when a channel in your local area broadcasts a time signal.

1Select “Clock” in “Settings,” and press

ENTER.

2Select “Auto Adjust,” and press ENTER.

Settings - Clock

Auto Adjust :

Off

 

1

 

 

 

 

Present Time :

Thu

1. 1. 2004. 21:39

3Select “On,” and press ,.

4Press M/m repeatedly until the programme position of the station that carries a time signal appears, and press ENTER.

Settings - Clock

Auto Adjust :

On

1

Present Time :

Thu

1. 1. 2004. 21:39

•If the recorder does not receive a time signal from any station, “Auto Adjust” returns to “Off” automatically and the menu for setting the clock manually appears on the screen.

zHint

If you set “Auto Adjust” to “On,” the Auto Clock Set function is activated whenever the recorder is turned off.

bNote

The Auto Clock Set function does not work while the recorder is standing by for Synchro-Recording.

To set the clock manually

If the Auto Clock Set function did not set the clock correctly for your local area, try another station for the Auto Clock Set function or set the clock manually.

1Select “Clock” in “Settings,” and press

ENTER.

2Select “Auto Adjust,” and press ENTER.

Settings - Clock

Auto Adjust :

Off

 

1

Present Time :

Thu

1. 1. 2004. 21:39

 

 

 

 

3Select “Off,” and press ENTER.

4Select “Present Time,” and press ENTER.

Clock - Present Time

Set the time and date manually.

Sat 1 1 2005 0 : 00

5Press M/m to set the day, and press ,. Set the month, year, hour, and minutes in sequence. Press </, to select the item to be set, then press M/m to set the numbers. The day of the week is set automatically.

To change the numbers, press < to return to the item to be changed, and press M/m.

6Press ENTER to start the clock.

86