Additional Information

Troubleshooting

If you experience any of the following difficulties while using the recorder, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

PowerThe power does not turn on.

,Check that the mains lead is connected securely.

PictureThere is no picture.

,Re-connect all connecting cords securely.

,The connecting cords are damaged.

,Check the connection to your TV (page 13).

,Switch the input selector on your TV (such as to “VCR”) so that the signal from the recorder appears on the TV screen.

,Check that “Scart Setting” in “Video” setup is set to the appropriate item that conforms to your system (page 88).

,If you connect the recorder to your TV via only the COMPONENT VIDEO OUT jacks, set “Component Out” in “Video” setup to “On” (page 88).

,This recorder cannot record NTSC signals.

,When playing a double-layer DVD, the video and audio may be momentarily interrupted at the point where the layers switch.

Picture noise appears.

,If the picture output signal from your recorder passes through your VCR to get to your TV, or if you are connected to a combination TV/VIDEO player, the copy-protection signal applied to some DVD programmes could affect picture quality. If you still experience this problem even when you connect your recorder directly to your TV, try connecting your recorder to your TV’s S VIDEO input.

,You have set the recorder to progressive format (the PROGRESSIVE indicator lights up) even though your TV cannot accept the progressive signal. In this case, press PROGRESSIVE until the PROGRESSIVE indicator turns off.

,Even if your TV is compatible with progressive format (525p/625p) signals, the image may be affected when you set the recorder to progressive format. In this case, press PROGRESSIVE so that the PROGRESSIVE indicator turns off and the recorder is set to normal (interlace) format.

,You are playing a DVD recorded in a colour system that is different from your TV.

,Noise may appear in the pictures recorded on the HDD, which is due to the characteristics of HDD, and is not a malfunction.

,When playing a double-layer DVD, the video and audio may be momentarily interrupted at the point where the layers switch.

TV programme reception does not fill the screen.

,Set the channel manually in “Channel Setting” in “Settings” setup (page 82).

,Select the correct source using the INPUT SELECT button, or select a channel of any TV programme using the PROG +/– buttons.

96