Tape – Recording
Recording your favorite CD tracks on a tape
— CD-TAPE Synchro Recording
You can record a whole CD on a tape. You can use TYPE I (normal) tape. The recording level is adjusted automatically. Use buttons on the unit for the operation.
1 Load a recordable tape into deck B, then press TAPE A/B repeatedly to select deck B.
2 Press CD and load a disc you want to record.
If you have already loaded the disc, press DISC
When you want to record an album from an MP3 disc, be sure to press PLAY MODE repeatedly to select ALBM, then press ALBUM + or – repeatedly to select the desired album before proceeding.
3 Press CD SYNC.
Deck B stands by for recording. “REC” flashes.
4 Press REC PAUSE/START.
Recording starts. When the recording is completed, the CD player and the tape deck stop automatically.
To stop recording
Press x.
To record a disc by specifying track order
You can record only your favorite CD tracks using Program Play. Between steps 2 and 3, perform steps 2 to 6 of “Creating your own program” (page 13).
Recording on a tape manually
— Manual Recording
You can record just the portions you like from a CD, tape or radio program on a tape.
You can also record from connected components (see “Hooking up optional components” on page 27).
Use buttons on the unit for the operation.
1 Load a recordable tape into deck B, then press TAPE A/B repeatedly to select deck B.
2 Press one of the following buttons to select the desired source to record.
•CD: To record from this system’s CD player.
•TAPE A/B: To record from this system’s tape deck A.
•TUNER/BAND: To record from this system’s tuner.
•AUDIO IN: To record from the optional component connected to the AUDIO IN jack.
3 Press REC PAUSE/START.
Deck B stands by for recording. “REC” flashes.
4 Press REC PAUSE/START, then start playing the desired source to record.
Recording starts.
To stop recording
Press x.
Notes
•You cannot listen to other sources while recording.
•Recording stops if you change the function to another one.
Tip
For recording from the tuner:
If noise is heard while recording from the tuner, move the respective antenna to reduce the noise.