Creating your own program
— Program Play
You can make a program of up to 25 steps from all the discs in the order you want to play them. You can synchro record the programmed tracks onto a cassette tape (page 18).
1 Press CD (or FUNCTION repeatedly) to switch the function to CD.
2 Press PLAY MODE repeatedly in stop mode until “PGM” appears.
3 Press DISC SKIP (or DISC 1 – 3 or DISC
4 Press . or > repeatedly (or turn l L on the unit) until the desired track number appears.
When programming the MP3 audio tracks, press ALBUM + or – repeatedly to select the desired album, then press . or > repeatedly (or turn l L on the unit) until the desired track number appears.
Disc tray number Selected track number
Total playing time (including selected track)
5 Press ENTER.
The track is programmed.
The program step number appears, followed by the total playing time.
6 | Program additional tracks. | |
| To program | Repeat steps |
|
| |
| Other tracks on the 4 and 5 | |
| same disc |
|
|
|
|
| Other tracks on | 3 to 5 |
| other discs |
|
7 |
|
|
Press N. |
| |
| Program Play starts. | |
Other operations | ||
|
|
|
To |
| Do this |
|
| |
Cancel Program | Press PLAY MODE repeatedly | |
Play |
| in stop mode until “PGM” |
|
| disappears. |
|
| |
Clear a track from | Press CLEAR in stop mode. | |
the end |
| |
|
|
|
Tips
•The program you made remains after Program Play finishes. To play the same program again, press CD (or FUNCTION repeatedly) to switch the function to CD, then press N. However, the program is cleared when you open the disc tray.
•“–