Using | Each time the key is pressed, the | ||
Operations | display is changed in order. | ||
— Learning Function (continued) |
|
|
|
|
|
|
|
|
|
|
|
To display only the frequently used keys
You can hide keys you do not use. This makes operations even easier to understand, when the components have many keys.
After Step 2 (page 15), while pressing the LIGHT button, press the key you want to hide (flashing). The pressed key changes to slower flashing and will no longer be displayed during remote control operations.
To display it again, perform the same procedure again.
Note
You can not hide a key which has “learned” any signal.
To change the function display of a key
When you program a signal for a key, you can select the most suitable function display among all the displays the key has, and set it to the key.
1After Step 2 (page 15), while pressing the Component Select button (VCR), press the key you want to teach repeatedly.
2When the desired display appears, release the Component Select button.
3Then follow Steps 4 to 6 (page 16).
Notes
•You can change the display of a key only when you program it using the learning function. If you want to change the display of the key that has learned a signal, clear the signal first (page 19). Then teach the key again using the above procedure to change its display.
•If you do not change the display of a key, the default display is used.
•You cannot change the display of the keys
that are not framed with 
(the number keys 0 to 9, +10 and ENTER).
18