Operating Your Components with the Remote Commander (continued)

To control the volume

Press the VOLUME +/– buttons to control the volume, and the MUTING button to mute. When you select a visual component, the TV’s volume will be controlled, and when you select an audio component, the amplifier’s volume will be controlled. You can change this setting also (page 21).

Notes

•If you have programmed any signal for the VOLUME or MUTING button for any component using the learning function (page 15), that signal will be transmitted instead of controlling the volume of the TV or amplifier once you select that component.

•If you have programmed any signal for the VOLUME or MUTING button of TV or AMP using the learning function, that signal will be transmitted only after you select TV or AMP. When you select another components, the preset volume control signals for TV or AMP will be transmitted at that time.

•If you have assigned another component to the TV or AMP button, the volume of the TV or amplifier cannot be controlled even when you select other components.

Notes on operating your components

About the input select of a TV

The component code “8077” is the preset code number for the input select of a Sony TV. You can set this code number for an infrequently used Component Select button.

Follow the procedure on page 8 for the input select setting.

“0” : TV tuner

“1” : VIDEO1

“2” : VIDEO2

“3” : VIDEO3

“4” : VIDEO4

“5” : VIDEO5

“6” : VIDEO6

“7” : HD1

“8” : HD2

“9” : HD3

This setting can be used for programming the SYSTEM CONTROL buttons (page 41).

14