Operations Remote Advanced
Brief descriptions of buttons used for
advanced remote operations
SYSTEM STANDBY: Press this switch together with the AV 1/uswitch and MASTER VOLUME – button to reset all the function buttons to the factory settings.
AV 1/u: Press this switch together with the SYSTEM STANDBY switch and MASTER VOLUME – button to reset all the function buttons to the factory settings.
Numeric buttons: Used when changing the factory settings of the function buttons.
ENTER D.TUNING: Used when changing the factory settings of the function buttons.
Function buttons: Comes with factory settings that you can change.
MASTER VOLUME
SHIFT >10
Changing the Factory
Setting of a Function
Button
You can change the factory settings of the function buttons (page 5) to suit the components in your system. For example, if you connect a Sony LD player to the VIDEO 2 jacks on the receiver, you can set the VIDEO2 button on this remote to control the LD player.
Note, however, that the settings of the TUNER, PHONO, and 5.1 IN buttons cannot be changed.
1Press the button corresponding to the component you want to assign to a function button (button 6 for the LD player, for example).
Each button and its corresponding components are shown below.
Button | Component |
1 | CD player |
|
|
2 | DAT deck |
|
|
3 | MD deck |
|
|
4 | Tape deck A |
|
|
5 | Tape deck B |
|
|
6 | LD player |
|
|
7 | VCR (Beta) |
|
|
8 | VCR (8 mm) |
|
|
9 | VCR (VHS) |
|
|
0 | TV |
|
|
SHIFT >10 | DBS tuner |
|
|
ENTER D.TUNING | DVD player |
|
|
2While pressing down the button corresponding to the component, press down the function button whose setting is to be changed (the VIDEO2 button, for example).
The VIDEO2 button is now set to control the Sony LD player.
To reset a button to its factory setting
Repeat the procedure above.
To reset all function buttons to their factory settings
First press down MASTER VOLUME
12