Sony RM-U401 manual 7

!¢ ENTER D.TUNING button

If you have selected tuner:

Press to enter direct tuning mode.

If you have selected VCR, DVD player, LD player, TV, DBS tuner, tape deck, MD deck, or CD player:

After selecting a channel, disc, or track using the numeric buttons, press to enter the value.

!° SHIFT >10 -/-- button

If you have selected tuner:

Press repeatedly to select a memory page for presetting radio stations or tuning to preset stations.

If you selected VCR, TV, LD player, tape deck, MD deck, or CD player:

Press before inputting a channel or track number of eleven or higher.

!§ Numeric buttons (1 to 0)

Inputs the correponding numeric value. When inputting a channel, disc, or track number, 0 selects 10.

!¶ CH/PRESET +/– buttons

Press repeatedly to select a preset station or channel.

!• CURSOR MODE button

Press this button repeatedly to select any of the following three cursor modes. The indicator for the selected cursor mode lights up to the left of the display window on the receiver. The indicator turns off when you press the SET UP button on the receiver.

When the cursor mode is You can

SURROUND	Change the delay time and the
	effect level
BASS/TREBLE or EQ	Adjust the tone (bass/treble) of
	the front speakers. Press the EQ/
	TONE ON/OFF button to
	activate the tone effect.
INDEX	Enter an index name for a preset
	station or program source

Note

The CURSOR MODE button does not operate on receivers that have no cursor buttons.

!ª Tape/disc operation buttons

The following table describes the component operated by each button and the function of the buttons.

Button(s)	Component(s)	Function
9	Tape deck	Starts play on the reverse
		side of the cassette
(	VCR, DVD player,	Starts play on the front
	LD player, tape deck,	side of the cassette
	MD deck, CD player,
	DAT deck
P	VCR, DVD player,	Pauses play or recording
	LD player, tape deck,	or starts recording when
	MD deck, CD player,	the component is in
	DAT deck	recording standby
p	VCR, DVD player,	Stops play
	LD player, tape deck,
	MD deck, CD player,
	DAT deck
=/+ VCR, DVD player,		Skips tracks
	LD player, tape deck,
	MD deck, CD player,
	DAT deck
0/) VCR, LD player, tape		Fastwinds or rewinds
	deck, MD deck, DAT
	deck
	DVD player, CD	Searches tracks in the
	player	forward or backward
		direction
r	VCR, tape deck, MD	Sets the tape deck in
	deck, DAT deck	recording standby
r+ ((if	VCR, Tape deck,	Starts recording. You can
pressed	DAT deck	press 9for the tape
together)		deck or DAT deck
		instead of (.
DISC	CD player	Selects a disc (CD player
		with a multi-disc changer
		only)
D.SKIP	CD player	Skips a disc (CD player
		with a multi-disc changer
		only)

See the table on page 10 for information on the buttons that you can use to control each component.

Operations Remote Basic and Parts of Location

7