Symptom | Check these items |
|
Picture is fuzzy | • Adjust the brightness and contrast (page 11). |
|
| • Adjust the pitch and phase (page 12). |
|
| x Problems caused by a computer or other equipment connected, and not | |
| caused by the monitor |
|
| • Set the resolution to 1024 ⋅ 768 | ⋅ 1024 |
| computer. |
|
|
| |
Picture is ghosting | • Eliminate the use of video cable extensions and/or video switch boxes. | |
| • Check that all plugs are firmly seated in their sockets. | |
Picture is not centered or sized properly
Picture is too small | x Problems caused by a computer or other equipment connected, and not | |
|
| caused by the monitor |
| • | Set the resolution to 1024 ⋅ 768 |
|
| computer. |
|
|
|
Picture is dark | • | Adjust the backlight (page 11). |
| • Adjust the brightness (page 11). | |
| • | Adjust the gamma using “Gamma” (page 14). |
| • It takes a few minutes for the display to become bright after turning on the monitor. | |
| • | The screen might turn darker, depends on ECO mode you selected. |
|
|
|
Wavy or elliptical pattern (moire) | • | Adjust the pitch and phase (page 12). |
is visible |
|
|
Color is not uniform | • Adjust the pitch and phase (page 12). | ||
White does not look white | • | Adjust the color temperature (page 13). | |
|
|
| |
Monitor buttons do not operate | • | If “MENU LOCK” is set to ON, set it to OFF (page 14). | |
( | appears on the screen) |
|
|
The monitor turns off after a while xProblems caused by the connected computer or other equipment
• Set the computer’s power saving setting to off.
GB
After turnig off the main power, the 1 (power) indicator stays bright for a while
•When the main power is on but the 1 (power) switch is not pressed, or when the monitor is in the power saving mode, if you turn the MAIN POWER switch off, the 1 (power) indicator may not turn off right away. This is not a malfunction.
(continued)
19