12GB
BackFor details on each indicator, see “Indicator information” (page 47).
IDC IN terminal
Use to connect the supplied AC adaptor
(page17).
Rated output voltage of an AC adaptor: DC
18 V, 2.6 A
Note
The supplied AC adaptor and AC power cord
are exclusive for this unit. Do not use an AC
adaptor not supplied with this unit.
JWPS button
Use to make the network settings for the
WPS push button configuration (page 23).
KAUDIO IN terminal
Use to connect the audio output jack of an
external component.
L (LAN) port
Use to connect the network (LAN) cable
(not supplied).
MNETWORK STANDBY / STANDBY
switch
Switch between the network standby mode
and the standby mode (page 19).
NALL RESET button (Bottom)
Press and hold until all indicators light
while the unit is being turned on and reset
to its factory default settings.
Use a thin object, such as a small pin.
The previously registered settings or
information will be reset.
Note
Network settings are also reset when you
press ALL RESET button.
ALL RESET
button
Bottom