15GB
Getting Started
Bottom
For details on each indicator, see “Indicator information” (page 47).
KNETWORK STANDBY / STANDBY
switch
Switch between the network standby mode
and the standby mode (page 19).
LWPS button
Use to make the network settings for the
WPS push button configuration (page 23).
MUPDATE button, indicator
Press to start updating the software of the
unit (page 36).
Indicates the update status of the unit.
Green (lit): The unit can be updated.
Green (flashing): The unit is updating.
Red (flashing): An error has occurred.
Not lit: The unit does not need updating.
NALL RESET button
Press and hold until all indicators light
while the unit is being turned on and reset
to its factory default settings.
Use a thin object, such as a small pin.
The previously registered settings or
information will be reset.
Note
Network settings are also reset when you
press ALL RESET button.