— Auto power on/off function

3 Secure the center speaker to the stand with the two supplied screws and washers.

Listening to the sound

Operation panel on the subwoofer

LEVELMODE

MOVIE

POWER

ON/

STANDBY

MUSIC

Notes

•Do not remove the supplied speaker grille from the speaker while attaching the speaker to the speaker stand.

•Do not touch or press tweeter’s cover on the center of the speaker.

4 Adjust the angle of the speaker stand.

Loosen the two screws under the base to adjust the angle. Then tighten them again afterwards.

15º

25º

Screws

The optional speaker

stands

For greater flexibility in the positioning of the speakers, use the optional WS-FV10 (floor stand), WS-TV10 (TV stand), or WS-WV10 (wall mount bracket) speaker stand (available only in certain countries).

WS-FV10 WS-TV10 WS-WV10

MIN MAX

ON/STANDBY POWER indicator

First, turn down the volume on the amplifier. The volume should be set to minimum before you begin playing the program source.

1 Turn on the amplifier and select the program source.

2 Press POWER on the subwoofer.

The ON/STANDBY indicator on the subwoofer lights up green.

3 Play the program source.

Power turns on and off automatically

When the subwoofer is on (i.e, the ON/STANDBY indicator lights up green) and there is no signal input for a few minutes, the ON/STANDBY indicator changes to red and the subwoofer enters power saving mode. While in this mode a signal is input to the subwoofer, the subwoofer automatically turns on (auto power on/off function).

To turn this feature off, slide the POWER SAVE switch on the rear panel to OFF.

POWER

SAVE

AUTO

OFF

Note

If you turn down the volume level of the subwoofer too low, the auto power on/off function may activate, causing the subwoofer to enter power saving mode.

9GB