3-4. Connecting to Antennas - Round Dish (Satellite A)

Antenna

LNB

Cable TVSat A wall jack

Dish

Jack 1

Phone wall jack

Receiving Signals

1.Connect the “Antenna” to the “ANT IN” jack on the DIRECTV® High-Definition Receiver using a coaxial RF cable.

2.Connect the cable TV signal to the “CABLE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable.

3.Connect the “Jack 1” of the dish antenna to the “SATELLITE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your satel- lite dish antenna.)

4.Connect the “Phone Wall Jack” to “PHONE JACK” on the DIRECTV HD Receiver using a phone cable.

NOTE

While you are subscribing to a DIRECTV® programming package, you can still view over-the- air and cable TV programs, if you make connections to the over-the-air and/or cable jacks.

NOTE

You may not be able to receive DIRECTV® High- Definition programming with a round dish.

A triple LNB multi-satellite dish antenna with a SAT C LNB is required, along with this DIRECTV HD Receiver and high-definition tele-

vision equipment.

24