Presetting Radio Stations
You can preset 20 stations for FM and 10 stations for AM. Before tuning, make sure that you have turned down the volume to the minimum.
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
>10 | 10 0 | MEMORY |
TUNE +/– |
| PRESET +/– |
|
| BAND |
ENTER
1Press BAND repeatedly on the remote until the band you want appears on the front panel display.
Every time you press BAND, FM and AM changes alternately.
2Press and hold TUNE + or – until the frequency indication starts to change, then release.
Scanning stops when the system tunes in a station. “TUNED” and “ST” (for stereo program) appear on the front panel display.
3Press MEMORY.
A preset number appears on the front panel display.
4Press PRESET + or – to select the preset number you want.
5Press ENTER.
The station is stored.
6Repeat Steps 1 to 5 to store other stations.
To tune in a station with a weak signal
Press TUNE + or – repeatedly in Step 2 to tune in the station manually.
To change the preset number
Start over from Step 1.
To change the AM tuning interval
The AM tuning interval is factory set to 10 kHz.
To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the SUBWOOFER MODE button, turn the power back on. When you change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.
Started Getting
19