If you connect an MD deck

Connect the MD deck to the DIGITAL OPTICAL jack besides the AUDIO L/R jacks of AUX of the system.

MD deck

R L

OUTPUT

Main unit (left)

L

D I G I T A L

OPTICAL

R

AUDIO

VIDEO

IN

S-VIDEO

AUX

I N P U T

If you connect a digital satellite receiver with the DIGITAL OPTICAL jack

Connect the digital satellite receiver to the DIGITAL OPTICAL jack besides the AUDIO L/R jacks of AUX and VIDEO of the system.

Digital satellite receiver

R AUDIO L VIDEO

OUTPUT

Main unit (left)

L

D I G I T A L

OPTICAL

R

AUDIO

VIDEO

IN

S-VIDEO

Attaching the supplied foot pads to the

center speaker

Attach the supplied foot pads to the bottom of the speaker, one in each of the four corners to place the center speaker on your TV set. Make sure the speaker is solidly placed on the top of the TV set.

Foot pads

Note

Do not place the speaker on top of a TV set which is smaller than the speaker.

Installing the rear speakers with the

supplied accessories

Use the supplied accessories to properly install the rear speakers in their selected locations (see page 8).

Foot pads

If you install the rear speakers on a shelf or speaker stand, attach the supplied foot pads to the bottom of the speakers, one in each of the four corners, and make sure that the speakers are solidly placed.

Foot pads

Started Getting

AUX

I N P U T

zIf you use the S-video connector instead of the video jack

Your TV must also be connected via an S-video connector. S- video signals are on a separate bus from the video signals and will not be output through the video jack.

Note

Do not connect an amplified audio source. The combined amplification from the component and the speaker’s built-in amplifier may damage the speakers.

Note

Do not place any speaker on shelves or stands which are smaller than the speaker.

Continued to the next page

13