20 |
|
| Settings and adjustments (continued) |
|
|
|
|
|
|
|
|
Audio Settings (Audio Setup)
“Audio Setup” allows you to adjust your audio settings according to the playback conditions. The default settings are underlined.
Select “Audio Setup” in the setup display.
xAudio Digital Out
Switches the methods of outputting audio signals when you, connect 1. a digital component such as a receiver (amplifier) with a digital connector, 2. an audio component with a
You cannot adjust “Dolby Digital” and “DTS” if you set “DIGITAL OUT (OPTICAL)” to “Off.”
xDIGITAL OUT (OPTICAL)
Selects output signals via the DIGITAL OUT (OPTICAL) connector.
The item that you have selected in the system configuration menu will be the current setting here.
•On : Normally select this position.
When you select “On,” you can set “Dolby Digital” and “DTS.”
•Off : when the console does not output sound signals via the DIGITAL OUT (OPTICAL) connector, the influence of the digital circuit upon the analog circuit is at a minimum.
Note
When you select “Off,” you cannot set “Dolby Digital” and “DTS.”
xDolby Digital
Selects the Dolby Digital signals to be output via the DIGITAL OUT (OPTICAL) connector.
•On : when the console is connected to an audio component with a
If the console is connected to an audio component without a
•Off : when the console is connected to an audio component without a
x DTS
Selects the DTS signals to be output via the DIGITAL OUT (OPTICAL) connector.
•On : when the console is connected to an audio component with a
If the console is connected to an audio component without a
•Off : when the console is connected to an audio component without a
xAudio Track Auto Select Mode
Gives the sound track which contains the highest number of channels priority when you play a DVD on which multiple audio formats (PCM, DTS or Dolby Digital format) are recorded.
•On : Priority given.
•Off : No priority given.
Notes
•When you set this item to “On,” the language may change depending on the “Audio” settings in “Language Setup.”
The “Audio Track Auto Select Mode“ setting has higher priority than the “Audio” settings in “Language Setup” (page 18).
•If you set “DIGITAL OUT (OPTICAL)” to “On” and “DTS” to “Off” in “Audio Setup,” the DTS sound track is not played even if you set this item to “On” and the
•If PCM, DTS and Dolby Digital sound tracks have the same number of channels, the console selects PCM, Dolby Digital and DTS sound tracks in this order.
•Depending on the DVD, the audio channel with priority may be predetermined. In this case, you cannot give priority to the DTS or Dolby Digital format by selecting “On.”
x DVD Video Volume
If the audio output level of the DVD is low, you can turn up the volume of the DVD. (Note: DIGITAL OUT (OPTICAL) must be set to “Off” to access this function.)
•+2 : You can turn up the volume.
•+1 : You can turn up the volume.
•Standard : Original audio volume. Normally select this position.
Note
Depending on the DVD, the sound may be distorted if you select “+1” or “+2.”
After changing DVD settings
To save your changes, be sure to eject the DVD before pressing the 1/RESET button or turning off the unit with the MAIN POWER switch. Please note that changes will not be saved if you reset or turn off the console without first ejecting the DVD.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.