Setting sound options

Audio Digital Out

You can switch the method of outputting the audio signal when you connect the following audio devices to the DIGITAL OUT (OPTICAL) connector.

Caution

When the console is connected to an audio device without a Dolby Digital, DTS or MPEG decoder, set "Dolby Digital", "DTS" and "MPEG" to "Off". If you set these options to "On" without the necessary decoder, you may have no sound or an extremely loud noise may be emitted.

Digital Out (Optical)

This option sets the type of output for the DIGITAL OUT (OPTICAL) connector.

On

Select this option when you want sound (audio signal) to be output

 

through the DIGITAL OUT (OPTICAL) connector.

 

Settings for "Dolby Digital", "DTS" and "MPEG" are displayed.

 

 

Off

Select this option when you do not want sound to be output through the

 

DIGITAL OUT (OPTICAL) connector.

 

Settings for "Dolby Digital", "DTS" and "MPEG" are not displayed.

 

 

Dolby Digital

This option sets Dolby Digital as the output signal for the DIGITAL OUT (OPTICAL) connector.

On

Select this option when the console is connected to an audio device

 

with a built-in Dolby Digital decoder.

 

 

Off

Select this option when the console is connected to an audio device

 

without a built-in Dolby Digital decoder.

 

 

DTS

This option sets DTS as the output signal for the DIGITAL OUT (OPTICAL) connector.

On

Select this option when the console is connected to an audio device

 

with a built-in DTS decoder.

 

 

Off

Select this option when the console is connected to an audio device

 

without a built-in DTS decoder.

 

 

MPEG

This option sets MPEG AUDIO as the output signal for the DIGITAL OUT (OPTICAL) connector.

On

Select this option when the console is connected to an audio device

 

with a built-in MPEG decoder.

 

 

Off

Select this option when the console is connected to an audio device

 

without a built-in MPEG decoder.

 

 

DVDs

Adjusting DVD player settings 33