xAutomatic picture quality adjustment function
When the monitor receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 15).
Note
While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate.
If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture
You can make further automatic adjustment of the picture quality for the current input signal. (See AUTO below.)
If you still need to make further adjustments to the picture quality
You can manually adjust the picture’s sharpness (phase/pitch) and position (horizontal/vertical position).
These adjustments are stored in memory and automatically recalled when the display receives the same input signal. These settings may have to be repeated if you change the input signal after reconnecting your computer.
xMake further automatic adjustments to the picture quality for the current input signal (AUTO)
1Press the MENU button.
The main menu appears on the screen.
2Press the M/m buttons to select 
(SCREEN) and press the OK button.
The SCREEN menu appears on the screen.
3Press the M/m buttons to select AUTO and press the
OK button.
Make the appropriate adjustments of the screen’s phase, pitch and horizontal/vertical position for the current input signal and store them.
4Press the M/m buttons to select 
and press the OK button.
Return to the menu screen.
xAdjust the picture’s sharpness manually
(PHASE/PITCH)
You can adjust the picture’s sharpness as follows.
1Set the resolution to 1280 × 1024 on the computer.
2Load the Utility Disk.
3Start the Utility Disk and display the test pattern. For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4Press the MENU button.
The main menu appears on the screen.
5Press the M/m buttons to select 
(SCREEN) and press the OK button.
The SCREEN menu appears on the screen.
6Press the M/m buttons to select PHASE and press the OK button.
The PHASE menu appears on the screen.
7Press the M/m buttons until the horizontal stripes are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8Press the OK button.
Return to the SCREEN menu.
If vertical stripes are observed over the entire screen, adjust pitch by the following steps.
9Press the M/m buttons to select PITCH and press the
OK button.
The PITCH menu appears on the screen.
10Press the M/m buttons until the vertical stripes disappear.
Adjust so that the vertical stripes disappear.
11Click [END] on the screen to turn off the test pattern.
12Press the OK button.
Return to the SCREEN menu.
13Press the M/m buttons to select 
and press the OK button.
Return to the menu screen.
12