Setup

Unpacking

Make sure your carton contains everything listed below.

•LCD display

•Power cord

•HD15-HD15 video signal cable (analog RGB)

•DVI-D video signal cable (digital RGB)

•Cord strap

•CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.)

•Warranty card

•This Quick Setup Guide

to the DVI-D input

to the HD15 input

connector (digital RGB)

connector (analog RGB)

 

INPUT 1

INPUT 2

 

DVI-D

HD-15

DVI-D video

 

2

signal cable

 

 

(digital RGB)

HD15-HD15

(supplied)

video signal

 

 

cable (analog

 

RGB)

 

(supplied)

Connecting your monitor

Connect your monitor to a computer or other equipment.

•Turn off the monitor, computer, and any other equipment before connecting them.

•Do not touch the pins of the video signal cable plug.

1 Remove the back cover.

2 Connect your monitor to a computer.

Connecting a Macintosh computer

Connect the supplied video signal cable to a video output connector on the computer. If necessary, use an adapter (not supplied). Connect the adapter to the computer before connecting the video signal cable.

3 Connect the supplied power cord to the monitor’s AC IN connector.

4 Connect the power cord to a power outlet.

1 back cover

to power outlet

power cord 3 to AC IN

4

(supplied)

Note

 

For details on securing the cords, refer to the Operating Instructions on the

US

CD-ROM.

Turning on the monitor and computer

Turn on your monitor first, then a computer.

1 Press upward the 1 (power) switch on the front right of the monitor.

The 1 (power) indicator lights up in green.

lights in green

INPUT

OKMENU

2 Turn on the computer.

3 (US)