Setup

Before using your monitor, check that the following items are included in your carton:

•LCD display

•Power cord

•HD15-HD15 video signal cable (analog RGB)

•Cord strap

•CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.)

•Warranty card

•Quick Setup Guide

Step 1:Open the stand

Note

The stand is folded at the factory. Be sure not to place the display vertically with the stand as it is. Otherwise, the display may topple over.

Step 2:Connect the display to your computer

Turn off the monitor and computer before connecting.

Notes

•Do not touch the pins of the video signal cable connector as this might bend the pins.

•Check the alignment of the HD15 connector to prevent bending the pins of the video signal cable connector.

Connect a computer equipped with an HD15 output connector (analog RGB)

Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the monitor’s HD15 input connector (analog RGB).

Connect the computer according to the following illustrations.

xConnecting to an IBM PC/AT or compatible computer

to the HD15 input connector (analog RGB)

to the computer’s HD15 output connector (analog RGB)

 

HD15-HD15 video signal

 

IBM PC/AT or

cable (analog RGB)

 

(supplied)

GB

compatible computer

 

xConnecting to a Macintosh computer

When connecting this monitor to a Macintosh computer, use the Macintosh adapter (not supplied) if necessary. Connect the Macintosh adapter to the computer before connecting the cable.

to the HD15 input connector (analog RGB)

to the computer’s

HD15-HD15 video

signal cable (analog

output connector

RGB) (supplied)

Macintosh computer

7