Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the 1 (power) indicator will light up in green.

If the function tells you the monitor may have a potential failure, consult your authorized Sony dealer.

If the picture disappears from the screen and the

1(power) indicator is green

1 Turn off the 1 (power) switch and disconnect the video signal cables from the monitor.

2 Turn the monitor on by pressing the 1 (power) switch.

If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cables and check the condition of your computer(s).

If the color bars do not appear, there is a potential monitor failure.

Displaying this monitor’s information

While the monitor is receiving a video signal, press and hold the MENU button for more than 5 seconds until the information box appears.

Press the MENU button again to make the box disappear.

Example

MENU

INFORMATION

Model name

 

 

MODEL : SDM-HX93

SER. NO : 1234567 Serial number

MANUFACTURED : 2003-40

Week and year of manufacturee

If any problem persists, call your authorized Sony dealer and give the following information:

•Model name: SDM-HX73 or SDM-HX93

•Serial number

•Detailed description of the problem

•Date of purchase

•Name and specifications of your computer and graphics board

•Type of input signals (analog RGB/digital RGB)

Specifications

LCD panel

Panel type: a-Si TFT Active Matrix Picture size:

17 inch (43 cm) (SDM-HX73)

19 inch (48 cm) (SDM-HX93) Input signal format

RGB operating frequency* Horizontal ⋅ Vertical:

28–80 kHz ⋅ 48-75 Hz (analog RGB) 28–64 kHz ⋅ 60 Hz (digital RGB)

Resolution

Horizontal ⋅ Vertical: Max. 1280 dots ⋅ 1024 lines

Input signal levels

US

Analog RGB video signal:

 

0.7Vp-p, 75 Ω , positive

SYNC signal:

TTL level, 2.2 kΩ , positive or negative (Separatehorizontal and vertical, or composite sync)

Digital RGB (DVI) signal: TMDS (Single link)

Audio input

Stereo minijack, 0.5 Vrms Speaker output

3 W ⋅ 2 Headphones jack

Stereo minijack

Power requirements SDM-HX73

100 – 240 V, 50 – 60 Hz, Max. 1.0 A SDM-HX93

100 – 240 V, 50 – 60 Hz, Max. 1.1 A Power consumption

Max. 50 W (SDM-HX73)

Max. 60 W (SDM-HX93) Operating temperature

5 – 35°C

Dimensions (width/height/depth)

Display (upright): SDM-HX73

Approx. 414 ⋅ 418.5 ⋅ 232 mm (16 3/8 ⋅ 16 1/2 ⋅ 9 1/4 inches)

SDM-HX93

Approx. 466.5 ⋅ 468 ⋅ 265 mm (18 3/8 ⋅ 18 1/2 ⋅ 10 1/2 inches)

Mass

SDM-HX73

Approx. 6.5 kg (14 lb 5 oz) SDM-HX93

Approx. 8.5 kg (18 lb 12 oz) Plug & Play

DDC2B

Included items

See “Setup.”

*Recommended horizontal and vertical timing condition

•Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs ec, whichever is larger.

•Horizontal blanking width should be more than 2.5 µsec.

•Vertical blanking width should be more than 450 µsec.

Design and specifications are subject to change without notice.

5 (US)