Setup

Unpacking

Make sure your carton contains everything listed below.

to the HD15 input

 

to the DVI-D input

connector (analog RGB)

connector (digital RGB)

INPUT 1

INPUT 2

 

INPUT 3

AUDIO IN HD-15

AUDIO IN HD-15 AUDIO

DVI-D

 

 

IN

 

•LCD display

•Power cord

•HD15-HD15 video signal cable (analog RGB)

•DVI-D video signal cable (digital RGB)

•Audio cord (stereo miniplug)

•CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.)

•Warranty card

•This Quick Setup Guide

audio cord (supplied)

HD15-HD15 video signal cable (analog RGB) (supplied)

2

DVI-D video signal cable (digital RGB) (supplied)

US

Connecting your monitor

Connect your monitor to a computer or other equipment.

•Turn off the monitor, computer, and any other equipment before connecting them.

•Do not touch the pins of the video signal cable plug.

1 Slide up the back cover.

2 Connect your monitor to a computer.

Connecting a Macintosh computer

Connect the supplied video signal cable to a video output connector on the computer. If necessary, use an adapter (not supplied). Connect the adapter to the computer before connecting the video signal cable.

3 Connect the supplied power cord securely to the monitor’s AC IN connector.

4 Connect the other end securely to a power outlet.

back cover

1

3

to AC IN

to power outlet

4

power cord (supplied)

Note

For bundling the cords and cables, refer to the Operating Instructions on the supplied CD-ROM.

Turning on the monitor and computer

Turn on your monitor first, then a computer.

1 Press the 1 (power) switch on the front of the monitor.

The 1 (power) indicator lights up in green.

2 Turn on the computer.

MENU

lights in green

1

OK

 

 

INPUT

 

 

3 (US)