Connecting your monitor

Connect your monitor to a computer or other equipment.

•Turn off the monitor, computer, and any other equipment before connecting them.

•Do not touch the pins of the video signal cable plug.

1 Remove the back cover.

2 Connect your monitor to a computer.

Connecting a Macintosh computer

Connect the supplied video signal cable to a video output connector on the computer. If necessary, use an adapter (not supplied). Connect the adapter to the computer before connecting the video signal cable.

3 Connect the supplied power cord to the monitor’s AC IN connector.

4 Connect the power cord to a power outlet.

 

back cover

 

1

to the DVI-D input

to the HD15 input connector

connector (digital

(analog RGB) for INPUT1 or

RGB) for INPUT2

INPUT2

HD15-HD15 2 video signal

cable (analog RGB) (supplied)

DVI-D video signal cable (digital RGB) (supplied)

3

to AC IN

to power

outlet

power cord (supplied)

4

USB

USB

downstream

upstream

connectors

connectors

To connect Universal Serial Bus (USB) compliant devices

If required, connect USB compliant devices to the USB connectors on the monitor (This monitor does not support USB 2.0). Connect USB compliant computers to the USB upstream connectors on the monitor using the supplied USB upstream cord. Connect USB peripheral devices to the USB downstream connectors. (For details, refer to the Operating Instructions on the CD-ROM.)

Notes

•When the monitor is in the power saving mode, USB peripheral devices will not function. To resume the use of USB peripheral devices, cancel the mode by pressing the 1 (power) switch.

•If the peripheral devices do not function properly, the upstream input setting may not be appropriate. Using “USB Select” on the OPTION menu of the menu system on this monitor, select the appropriate setting from among “Auto,” “Input1,” and “Input2,” according to the USB upstream connection you have made (For details, refer to the Operating Instructions on the supplied CD-ROM).

•For details on securing the cords, refer to the Operating Instructions on the CD-ROM.

Turning on the monitor and computer

Turn on your monitor first, then a computer.

US

 

1 Press the MAIN POWER switch on the right side of the monitor in the direction of the [.

The 1 (power) indicator lights up in red.

2 Press the 1 (power) switch on the front right of the monitor.

The 1 (power) indicator lights up in green.

3 Turn on the computer.

2

MAIN POWER 1

3 (US)