SFM3
Wood Stud Location
1.Using a stud finder, locate the 16” or 24” stud centers behind the wall.
2.Once found, make a pencil mark on the center of the wood studs (Figure 7).
Stud Finder
Mark
16"
Wooden Studs
Figure 7. Locating the Wooden Stud
3.Measure from the floor to the desired viewing height and mark the wall (Figure 8).
NOTE: This marking will reference the center of your flat panel display once mounted to the wall.
16"
Measure and Mark the Desired Viewing Height on the Wall
Figure 8. Measuring the Height
Page - 8 - | Installation Instructions |
