Notes

•The clock cannot be set automatically if you do not receive a channel that carries a time signal in your area. If so, set the clock manually (page 22).

•If there are only a few channels in your area that carry time signals, setting the clock automatically may take up to about 20 minutes. If nothing happens even after you wait about 20 minutes, set the clock manually (page 22).

•If you made Hookup 3, make sure you leave the cable box on.

•To record TV programs using the timer, you must set the clock accurately.

•The clock display appears when VIDEO mode is selected with no tape inserted or when the DVD-VCR is turned off.

Using Manual Clock Set

Before you start…

•Turn on the DVD-VCR and your TV.

•To control the DVD-VCR, set TV / DVD·VIDEO to DVD·VIDEO on the remote (page 9).

•Set the “RF Output Channel” to “3CH” or “4CH” in “OPTION SETUP” menu (page 89). If your TV is connected to the DVD-VCR using A/V connections, set the TV to video input.

•If the DVD player is in play mode, you cannot display the “SETUP MENU.” Stop the DVD playback.

SET UP

V/v/B/b

ENTER

ORETURN

1

Press SET UP.

 

The “SETUP MENU” appears.

2

Press V/v/B/b to select

(Clock Set/

Adjust), then press ENTER.

 

The “CLOCK SET/ADJUST” menu appears.

22Setting the clock