To cancel the Auto Set Up functionPress O RETURN.To change the RF channel

If the picture does not appear clearly on the TV, change the RF channel on the DVD-

VCR and TV. Select (INSTALLATION) from the menu, then press V/v to select VIDEO OUTPUT CH. Select the RF channel by pressing the B/b buttons. Then, tune the TV to the new RF channel so that a clear picture appears.

Tip

If you want to change the language for the on-screen display from the one preset in the Auto Set Up function, see page 16.

Notes

Whenever you operate the Auto Set Up function, some of the settings (VIDEO Plus+, timer, etc.) will be reset. If this happens, you have to set them again.

Auto preset starts automatically only when you plug in the mains lead for the first time after you purchase the DVD-VCR.

If you want to use the Auto Set Up function again, press SET UP, then press V/v/B/b to

select (INSTALLATION) and press ENTER. Press V/v to select AUTO SET UP.

Auto preset can be performed by pressing x on the DVD-VCR continuously for 5 seconds or more during power off with no tape inserted.

Started Getting

Setting up the DVD-VCR with the Auto Set Up function 15