Tip

You can listen to the sound during 2 fast forward playback. However, you cannot listen to DTS (Only Digital Out), MPEG audio and LPCM sound.

To make a video timer reservation during DVD playback, we recommend performing the operations under “Setting the recording duration time” (page 82).

Notes

You can change the screen type using the “SCREEN SETUP” menu. (See “Screen Setup” on page 55)

Do not perform VIDEO playback while playing back a disc.

The VIDEO CD playback speed changes as follows.

4 t 8

You cannot change the CD or DATA-CD playback speed.

Notes on playing DTS* sound tracks on a CD

When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the DVD player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be connected to the digital jack of the DVD player.

Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a CD (page 73).

Do not play DTS sound tracks without first connecting the DVD player to an audio component having a built-in DTS decoder. The DVD player outputs the DTS signal via the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Off” in “AUDIO SETUP” menu (page 53), and may affect your ears or cause your speakers to be damaged.

Notes on playing DVDs with a DTS sound track

DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack.

When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP” menu (page 53).

If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “On” in “AUDIO SETUP” menu (page 53). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.

* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Operations Basic

Playing discs 29