Symptom

 

Remedy

 

 

 

 

 

 

 

 

 

The timer does not operate.

• Check that the clock is set.

 

 

 

 

 

• Make sure a tape has been inserted.

 

 

 

 

 

• Check that the safety tab has not been removed.

 

 

 

 

• Make sure the tape is not at its end.

 

 

 

 

 

• Make sure a programme has been set for timer recording.

 

 

 

 

• Make sure your timer settings are past the current time.

recording

 

 

 

• Check that the decoder is turned on.

 

 

 

 

the mains for more than one minute. Reset the clock and

 

 

 

 

• Check that the satellite tuner is turned on.

 

 

 

 

• The clock stops if the DVD-VCR is disconnected from

Timer

 

 

 

timer.

 

 

 

 

 

• Turn the power off and unplug the mains lead.

 

 

 

 

 

 

 

 

 

 

The PDC function does not operate

• Check that the clock and the date are set correctly.

 

 

properly.

 

• Check that the PDC time you set is the correct one (there

 

 

 

 

might be a mistake in the TV programme guide). If the

 

 

 

 

broadcast you wanted to record did not send the good

 

 

 

 

PDC information, the VCR will not start recording.

 

 

 

 

• If the reception is poor, the PDC signal might be altered

 

 

 

 

and the VCR might not start recording.

 

 

 

 

 

 

A tape cannot be inserted.

• Check that a tape is not already in the tape compartment.

 

 

 

 

 

 

The selected input line connector

• Press INPUT SELECT to display the connected line.

Others

 

number does not appear in the

• Clean the cabinet, panel and controls with a dry, soft

 

The VCR mechanism needs to be

 

 

display window.

 

 

 

 

 

 

cleaned.

 

cloth, or a soft cloth slightly moistened with a mild

 

 

 

 

detergent solution. Do not use any type of solvent, such

 

 

 

 

as alcohol or benzine.

 

 

 

 

 

 

 

Symptoms caused by contaminated video heads

 

 

• Normal picture

• Rough picture

• Unclear picture

• No picture (or

 

 

 

 

 

 

black & white

 

 

 

 

 

 

screen appears)

initial

terminal

contamination

 

110Troubleshooting