2

Connect the mains lead to the mains.

 

 

The DVD-VCR automatically turns on and the

 

DVD-VCR starts searching for all of the

 

receivable channels and presets them (in the

 

appropriate order for your local area).

 

If you want to change the order of the channels

 

or disable unwanted programme positions, see

 

“Changing/disabling programme positions” on

 

page 21.

 

After the search is complete, the current time

 

appears for any stations that transmit a time

 

signal. If the time does not appear, set the

 

clock manually. See “Setting the clock” on

 

page 17.

AUTO SETUP

Please wait

10%

RETURN SET UP

Started Getting

To cancel the Auto Set Up function

Press SET UP.

To change the RF channel

If the picture does not appear clearly on the TV, change the RF channel on the DVD- VCR and TV. Select “Install” in the “OPTION” menu, then press V/v to select “Video Output CH”. Select the RF channel by pressing the B/b buttons and press ENTER. Then, tune the TV to the new RF channel so that a clear picture appears.

Tip

•If you want to change the language for the on-screen display from the one preset in the Auto Set Up function, see page 16.

Notes

•Whenever you operate the Auto Set Up function, some of the settings (VIDEO Plus+, timer, etc.) will be reset. If this happens, you have to set them again.

•Auto preset starts automatically only when you plug in the mains lead for the first time after you purchase the DVD-VCR.

•If you want to use the Auto Set Up function again, select “Install” in the “OPTION” menu, then press V/v to select “Auto Setup”.

•Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more during power off with no tape inserted.

Setting up the DVD-VCR with the Auto Set Up function 15