Set •TV/VIDEO at the top of the remote commander to •TV.

Step 2 : Setting up the remote commander (continued)

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery together with an old one.

•Do not use different types of batteries together.

•Some buttons may not work with certain Sony TVs.

Controlling other TVs with the remote commander (SLV-EZ727AZ only)

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturer’s code number.

1

2 Hold down ?/1, and enter your TV’s code number using the programme number buttons. Then release ?/1.

Now you can use the following TV control buttons to control your TV:

?/1, VOL +/–, PROG +/–, programme number buttons, -/-- (ten’s digit) and TV/VIDEO.

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer

Code number

Sony

01, 02

 

 

Akai

68

 

 

Ferguson

52

 

 

Grundig

10, 11

 

 

Hitachi

24

 

 

JVC

33

 

 

Loewe

45

 

 

Mivar

09, 70

 

 

NEC

66

 

 

Nokia

15, 16, 69

 

 

Manufacturer

Code number

Panasonic

17, 49

 

 

Philips

06, 07, 08

 

 

Saba

12, 13

 

 

Samsung

22, 23

 

 

Sanyo

25

 

 

Sharp

29

 

 

Telefunken

36

 

 

Thomson

43

 

 

Toshiba

38

 

 

12Getting Started