To cancel the Auto Set Up function

Press MENU.

To change the RF channel

If the picture does not appear clearly on the TV, change the RF channel on the VCR and TV. Select INSTALLATION from the menu, then press M/m to highlight VCR OUTPUT CH and press ,. Select the RF channel by pressing the M/mbuttons. Then, tune the TV to the new RF channel so that a clear picture appears.

Notes

•Whenever you operate the Auto Set Up function, some of the settings (timer, etc.) will be reset. If this happens, you have to set them again.

•Auto preset starts automatically only when you plug in the mains lead for the first time after you purchase the VCR.

•Auto preset can be performed by pressingx STOP on the VCR continuously for 5 seconds or more with no tape inserted.

Started Getting

Getting Started 17