Operation (when recording on this VCR)
Before you start editing
•Turn on your TV and set it to the video channel.
•Press INPUT SELECT or CHANNEL +/– to display “L2” (or “L1”) in the display window.
•Press SP/EP to select the tape speed, SP or EP.
XPAUSE
z REC
1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape into this (recording) VCR. Search for the point to start recording and press XPAUSE.
3 Press zREC on this VCR to set it to recording pause.
4 To start editing, press the XPAUSE buttons on both VCRs at the same time.
To stop editing
Press the xSTOP buttons on both VCRs.
Tip
•To cut out unwanted scenes while editing, press X PAUSE on this VCR when an unwanted scene begins. When it ends, press X PAUSE again to resume recording.
Note
•If you start recording following the procedure above, the VCR won’t start recording with the APC function. To record a tape with the APC function, press z REC again during recording pause in step 3 so that the VCR analyzes the tape. Then, press X PAUSE after the APC indicator stops flashing to start recording. If you press X PAUSE before the APC indicator stops flashing, the APC function is canceled.
Operations Additional
Editing with another VCR 95