Additional connections

To a stereo system (not available on SLV-SE630N and SE430K)

Getting

You can improve sound quality by connecting a stereo system to the AUDIO R/D L/G jacks as shown on the right.

AUDIO R/D L/G

LINE IN

Audio cable (not supplied)

Started

: Signal flow

To a satellite or digital tuner with Line Through

Using the Line Through function, you can watch programmes from a satellite or digital tuner connected to this VCR on the TV even when the VCR is turned off. When you turn on the satellite or digital tuner, this VCR automatically sends the signal from the satellite or digital tuner to the TV without turning itself on.

LINE-3

(DEC/EXT)*1 or

LINE

LINE-2

(DEC/EXT)*2

 

 

OUT

Scart cable (not supplied)

: Signal flow

1 Connect the satellite or digital tuner to the LINE-3 (DEC/EXT)*1 or LINE-2 (DEC/EXT)*2 connector as shown above.

2 Turn off the VCR.

To watch a programme, turn on the satellite or digital tuner and the TV.

Notes

•The Line Through function will not operate properly if POWER SAVE in the USER SET menu is set to ECO2. Set POWER SAVE to OFF or ECO1 to ensure proper operation (see page 69).

•You cannot watch programmes on the TV while recording unless you are recording a satellite or digital programme.

•This function may not work with some types of satellite or digital tuners.

•When the VCR is turned off, set the TV to the video channel.

*1 SLV-SE830N

*2 SLV-SE730N, SX730N, SE630N and SE430K

Connecting the VCR 19